Actually i call the client by dialing from computer, i have written code for that, after getting response from opposite side i couldn't answer to that opponent, that means my voice is not transfering through modem to opponent phone.
how to enable my headphone/mic. Please help immediately.
Posted by alagurajan
on 03/07/2005 11:44pm
ya i am also having the same problem some one plz replay soon
I want to build a program can auto dial by modem.
In my program :
-I can know status of modem includes: sended speed , recieved speed , transfered speed.
-and more but I do not know what I should begin ?
Please help me . Thank you very much .
i am using hayes commands to dial a telephone number. my connectivity is ok. but i am not able to talk using the headphone , connected to modem. but if i am using a telephone receiver connected parallally to the same modem , it is ok. but the problem is my program loose its control over the modem.
please guide me. . . .
My modem has finish the job of dialing process,but without PPP connection. And how can I use serial port connected with that modem to serve RAS dailing. How to config or replace some modules?
Now i am devleloping one project - automatic answering ,
in that i need a program to recives a phone call, then user press a number from telephone, i must recive the number based on that i replay to that phone ( as a voice data),
I wants dialup with serialport communication source code.We wants to check 64kbps modem with rs-232 communication.First we have to dial with modem and after conntection is establised have send some data through same comport 1 and receive back the data.We have some problem with this testing.pls try to help