CEPC Does not recognize Hard Drive

[bhavani123456]

Hi,

I have installed WinCE 5.0 & Platform Builder on a Windows XP desktop computer, having these characteristics:

- CPU: Inter(R) Pentium(R) 4 CPU 3.00GHz
- RAM: 512 MB
- Hard Disk: 20 GB

These are the steps I made:

- I followed the procedure mentioned in the Platform Help "How to Configure Hard Disk Drives on a CEPC" and added FAT file system / storage device/wordpad to the OS design and build the OS image nk.bin

- I booted another machine(CEPC) from the floppy which has the boot sequence
- I attached the Windows XP desktop computer to the CEPC through ethernet & loaded the nk.bin to CEPC

Wince runs correctly on CEPC but I have some problems:

1) The hard disk drive is not recognized, even if in the OS design I have inserted all the needful drivers and applications, as explained in the Platform Help (section "How to Configure Hard Disk Drives on a CEPC").

Can someone please give me some advice or also some useful link?

Thanks in advance

--------------------------------------------------------------------------------
Bhavani

[dglienna]

Create a small FAT32 partition. Don't know if you can get 20G on ce...